| 1 SN | High-pressure hose, DIN 20 022 (EN 853), part 3 corresp. to SAE 100 R1T, with one braid enforcement |
| 1~AC | 1-phase alternating current |
| 2 SN | High-pressure hose, DIN 20 022 (EN 853), part 4, corresp. to SAE 100 R2T, with two braid enforcements |
| 3~AC | 3-phase alternating current |
| °C | Degree Celsius |
| °F | Degree Fahrenheit |
| a | Outer / Male |
| AAS | Anti-drip coupler, automatic shut-off |
| ABGS | Discharge hose |
| ABK | Battery clips |
| ABM | Dimensions |
| ABS | Acrylonitrile butadiene styrene copolymer |
| ABSV | Shut-off valve |
| AC | Alternating current |
| AD | Outside diameter, in millimetres |
| Ah | Ampere hour |
| ALH | Discharge tap |
| ALNI | Aluminium nickel |
| Alu | Aluminium |
| AMS | Anti-drop coupler, manual shut-off |
| AR | Discharge tube |
| AS | Discharge hose |
| ASA | Automatic switch-off electronics |
| B | Product size |
| BA | Jaws |
| BD | Operating pressure |
| BE | Container |
| BHHP | Lever-operated gun for concrete work |
| BSF | British standard fine/Whitworth thread, quality: fine |
| BSP | British Standard Pipe |
| CDS | Code lock |
| CDSP | PIN code lock |
| CSM | Hypalon® |
| D1 | Funnel type grease nipple, 180°, straight |
| D1 A | Funnel type grease nipple, 180°, straight, drive-in nipple |
| DAZ | Digital display, access with code |
| dB (A) | Decibel, A-weighted noise level |
| DC | Direct current |
| DG | Swivel joint |
| DH | Double strokes |
| DIN | Deutsches Institut für Normung (German Institute for Standardisation) (DIN standards) |
| DK | Sealing cone |
| DL | Compressed air |
| DLFP | Air-operated grease gun |
| DM | Ceiling mounting |
| DMS | Diesel Management System |
| DN | Inner diameter, in millimetres |
| DRST | Pressure control |
| DW | Double-acting |
| DWMP | Double-acting brass pump |
| E-CTFE | Ethylene chlortrifluorethyhlene (Halar®) |
| EAATM | Stainless steel discharge spout with anti-drip coupler |
| EAN-Code | European Article Number Code (bar code) |
| EBZD | In-line meter, digital |
| EBZDU | In-line meter, digital, for urea (AdBlue®) |
| EBZM | In-line meter, mechanical |
| ED | Operating time |
| EF | Calibratable |
| EFA | Calibratable for Austria |
| EFL | Calibratable, with unit to prevent air measurement |
| EFS | Calibratable, float valve technology |
| EHFP | One-hand grease gun |
| EMP | Electric diaphragm pump |
| EN | European standard |
| EP | Extreme-pressure lubricants |
| EPDM | Ethylene propylene diene rubber |
| ESN | Drive-in nipple |
| EST | Interference suppression |
| ETV | Venting valve |
| EUS | Euro plug |
| EW | Single-acting |
| EWKP | Single-acting plastic pump |
| EWMP | Single-acting brass pump |
| EWZP | Single-acting die-cast zinc pump |
| EZP | Electric gear pump |
| F | Filter |
| FA | Flat design |
| FAV | Drum cover |
| FB | Mobile |
| FCKW | Fluorinated hydrocarbons |
| FEP | Tetrafluorethylene perfluorpropylene (Teflon® FEP) |
| FFG | Follower plate |
| FK | Grease cartridge |
| FKL | Follower plate |
| FKM | Viton® |
| FLA | Flexible spout |
| FLMA | Flexible metal spout |
| FMS | Fluid Management System |
| FN | Filling nipple |
| FPM | Fluoropolymer (Viton®) |
| FRSM | Anti-freeze |
| FS | Delivery hose |
| ft | Foot (measure of length) |
| FUV | Foot valve |
| FV | Filling valve |
| FZP | Vane pump |
| G | Whitworth Pipe Thread, cylindrical, ISO 228 (DIN 259) |
| gal. | gallon |
| GBDR | Angled spout coupler |
| GDA | Encased, swivel joint, outside |
| GDE | Container |
| GDI | Encased, swivel joint, inside |
| GE | Encased |
| GG | Gray cast iron |
| GGF | Closed handle |
| GLN | Global location number |
| GMZ | Glass measuring cylinder |
| gpm | Gallons per minute |
| GPM | Assembled on mounting plate |
| GRDR | Straight spout coupler |
| GRS | Straight safety spout |
| GS | Tested for safety |
| GTIN | Global Trade Item Number |
| H | Coupler for taper type grease nipple acc. to DIN 71 412 |
| H1 | Taper type grease nipple, 180°, straight |
| H1 A | Taper type grease nipple, 180°, straight, drive-in nipple |
| H2 | Taper type grease nipple, 45° |
| H2 A | Taper type grease nipple, 45 °, drive-in nipple |
| H3 | Taper type grease nipple, 90 ° |
| H3 A | Taper type grease nipple, 90°, drive-in nipple |
| HD | High pressure |
| HDPE | High density polyethylene |
| HHFP | Manual lever grease gun |
| HHFP-DG | Manual lever grease gun with closed cover, not detachable |
| HHÖP | Oil press designed as manual lever gun |
| HNBR | Hydrogenated acrylonitrile butadiene rubber |
| HS | High-pressure hose |
| Hyrtel® | Hyrtel® is a registered trademark of the Du Pont company |
| Hz | Hertz |
| HZ | Flow meter |
| HZD | Flow meter, digital |
| HZM | Flow meter, mechanical |
| HZMV | Flow meter, mechanical, pre-adjustable |
| i | Inside / Female |
| IBC | Intermediate Bulk Container (for transport and storage of liquids and pourable matters) |
| ID | Inner diameter |
| IKV | Available soon |
| ILN | International location number |
| INOX | Stainless steel |
| IP | Protection class |
| IPG | Pulse generator |
| IPGU | Pulse generator for urea (AdBlue®) |
| ISO VG | International Organization for Standardization; standard relating to degree of viscosity |
| K1 | Ball-type grease nipple, 180°, straight |
| kg | Kilogram |
| KK | Plastic canister |
| KØ | Diameter of head |
| KSAK | Plastic discharge spout |
| KSD | Plastic nozzle |
| KU | Coupler |
| kW | Kilowatt |
| L | Length, in millimetres |
| l/min | Liters per minute |
| lb | Pound |
| LBH | Length x width x height, in millimetres |
| LDPE | Low density polyethylene |
| LGA | Office of Trade and Industry, Bavaria, Nuremberg |
| LLDPE | Linear low density polyethylene |
| LW | Clear width |
| m | Meter |
| M | Metric thread, cylindrical, DIN 13 |
| M1 | Flat grease nipple, 16 mm, round head |
| M4 | Flat grease nipple, 10 mm, round head |
| M22 | Flat grease nipple, 22 mm, round head |
| M-Ein Aus | Manual on/off control by switch |
| MAGN | Magnet |
| MDPE | Medium density polyethylene |
| Me | Brass |
| MKF | Multi cartridge grease gun |
| mm | Millimeter |
| MO | Mobile |
| MoS2 | Molybdenum disulfide |
| mPas | Millipascal per second |
| MSD | Brass nozzle |
| MU | Coupler |
| N | Newton |
| NBR | Nitrile butadiene caoutchouc (Perbunan® Buna-N®) |
| ND | Nominal pressure |
| NEF | Non-calibratable |
| NEOP | Neoprene |
| NLGI | Stands for viscosity class 000 to 6, as defined by the National Lubricating Grease Institute, USA |
| NPS | National Straight Pipe, non-sealing and pressure-resistant cylindrical pipe thread |
| NPSF | National Straight Pipe, sealing and pressure-resistant cylindrical pipe thread |
| NPT | National Taper Pipe, non-sealing and pressure-resistant tapered pipe thread |
| NPTF | National Taper Pipe Fuel and Oil, sealing and pressure-resistant tapered pipe thread |
| NW | Nominal width = inside diameter |
| O | Open |
| Ø | Diameter |
| ÖDT | Oil can funnel |
| ÖLSYS | Oil system |
| ÖMS | Oil management system |
| PA | Polyamide |
| PC | Polycarbonate |
| PE | Polyethylene |
| PEI | Polyetherimide |
| PFA | Perfluoralkoxy (Teflon® PFA) |
| PMP | Polymethylpentene (TPX®) |
| PN | Nominal pressure or operating pressure |
| PNFP | Pneumatic grease pump |
| PNÖP | Pneumatic oil pump |
| PNP | Pneumatic pump |
| POM | Acetal homopolymer |
| PP | Polypropylene |
| PPGF | Polypropylene, glass fiber reinforced |
| PPS | Polyphenylene sulfide |
| PS | Polystyrol |
| PSF | Polysulfone |
| psi | Pound-force per square inch |
| PTB | Phyiscal Technical Institute of Germany |
| PTF | Pipe Taper Fuel and Oil, sealing and pressure-resistant tapered pipe thread |
| PTFE | Polytetrafluorethylene (Teflon®) |
| PVC | Polyvinyle chloride |
| PVC-U | Polyvinylchlorid-unplasticized |
| PVDF | Polyvinylidene fluoride |
| PZ | High-pressure hose |
| Q | Heat transfer oil |
| R | Whitworth thread, tapered, similar to DIN 3858, self-sealing connection |
| red | Reduction |
| RF | Radio frequency system |
| RK | Round head |
| RÖLSYS | Rape oil system |
| RST | High-quality steel |
| S | Buttress thread |
| SAE | Classification of viscosity grades for automotive lubricants by the Society of Automotive Engineers |
| SAN | Styrene acrylonitrile |
| SAR | Hose reel |
| SB | Self-service |
| SBV | Packaging for self-service |
| SD | Diesel hose |
| SF | Wrench flat |
| SFG | Self-forming thread |
| SI | Silicone rubber |
| SK | Hexagon |
| SKK | Hexagonal head |
| SKT | Screw-in cartridge |
| SKU | Quick coupling |
| SOT | Slide-on type |
| SPK | Spray head |
| SR | Stationary |
| SRL | Suction pipe length, in mm |
| St | Steel |
| STAK | Steel outlet bend |
| STV | Check valve |
| SW | Width across flats |
| T1/B | Flat grease nipple, 16 mm, hexagonal head |
| TA | Storage tanks |
| TRBF | Technical guideline for inflammable fluids |
| TÜV | Technical Inspection Agency in Germany |
| TW | Tank truck |
| UL | Underwriters Laboratories Inc. |
| UN | United Nations |
| UNF | Unified Fine Thread |
| Ust.-IdNr. | Sales tax identifcation number |
| UV | Ultraviolet |
| V | Volt |
| VA | Stainless steel |
| VDF | Cover, fixed |
| VE | Packaging unit |
| VK | Square |
| VÖR | Connection oil pump/pipework |
| VRSAR | For connection pipework/hose reel |
| VSK | Cap |
| VSTB | Galvanized sheet steel |
| VVP | Sales packaging |
| VZ | Galvanized |
| W | Watt |
| WA | Trolley |
| WAL | Angle spout |
| WB | Wall and floor mounting |
| WD | Wall and ceiling mounting |
| WG | Maintenance unit |
| WHG | Water Resources Act (Germany) |
| WHIT | Whitworth thread |
| WM | Wall mounting |
| WZ | Toolbox |
WZGT
| Tool pocket |
| ZBH | Accessories |
| ZDG | Die-cast zinc |
| ZHFP | Two-hand grease gun |
| ZSA | Centralized lubrication systems |
| ZVA | Automatic nozzle valve for diesel |
| ZVAB | Automatic nozzle valve for diesel with German type approval |
| ZVABD | Automatic nozzle valve for diesel with German type approval and swivel joint |
| ZVAD | Automatic nozzle valve for diesel with swivel joint |
| ZVAU | Automatic nozzle valve for urea (AdBlue®) |
| ZVAUD | Automatic nozzle valve for urea (AdBlue®) with swivel joint |
| ZVD | Manual nozzle valve, Al, with swivel joint |
| ZVH | control gun storage rack |
| ZVMU | Mechanical nozzle valve for urea (AdBlue®) |
| ZVMUD | Mechanical nozzle valve for urea (AdBlue®) with swivel joint |
| ZVPP | Nozzle valve, polypropylene |
| ZVS | Nozzle valve switch |
